You are here

Channel frequency of CYRF6936 | Cypress Semiconductor

Support & Community

Channel frequency of CYRF6936

Last Updated: December 24, 2011

When I set the CHANNEL_ADR to 0x00, why the carrier was found at 2401MHz actually?


Please refer to the  following snipping of lpradio.asm of any example project that using CYRF device,

ADD A, 2
; fallthru to RadioSetFrequency()
CMP A, 0
JZ .Chan0
.Chan0: MOV X, CHANNEL_ADR ; Write into the channel register.
JMP RadioWriteSwapped


According the code above, when you set channel register to 1, you will see the really using frequency is 1+2-1=2, means 2402, this is why set 0x00 to "CHANNEL_ADR" , the career frequency will be 2401MHz.

Please also refer to the detailed of TX_OFFSET_LSB_ADR & TX_OFFSET_MSB_ADR in WirelessUSB LP Technical Reference Manual which is availabel on our website:

Provide feedback on this article

Browse KB By Product

Browse KB by Type