You are here

Building Custom .nx2 File - KBA83970 | Cypress Semiconductor

Support & Community

Building Custom .nx2 File - KBA83970

Last Updated: December 20, 2012

How do I build a new .nx2 file?


New .nx2 file may be built using BldNx2.exe utility that comes with CY3686 SDK. The hex file selection for the custom .nx2 file desired, which is to be downloaded onto the NX2LP Flex Kit, is made on the basis of the page size of the NAND Flash, the NX2LP is interfacing with. The BldNx2.exe requires two separate set of firmware: 512-NAND firmware inand_fw.hex and either 2K-NAND firmware, nand_mc2k.hex or 4K-NAND firmware, nand_mc4k.hex.

Provide feedback on this article

Browse KB By Product

Browse KB by Type