The problem of receive in the slave of auto mode of AN63787 | Cypress Semiconductor
The problem of receive in the slave of auto mode of AN63787
I configure my CY7C68013A into the slave of auto mode. I test this process through the software Cyconsole. I use the Keil V3.30. I use keil in on-line debugging. But I found a problem. I don't kown whether this is keil or slave configuration.
First, I transmit the data (0x03 0xA1 0x4c 0x6e).Then but when I hault the keil. I found the regisiter of EP2BUF is all 0x02 and 0x00. The regisiter of EP2BCL displayed that there is four data. The picture of second in the package.
Second, I transmitted the data(0x57 0x3b 0x4f 0xab). Then I haulter the keil. I found the register of EP2BUF is 0x03 0xA1 0x4c 0x6e. And the regisiter of EP2BCL displayed that there is eight data. The picture of third in the package.