Linker problem - cannot find entry symbol | Cypress Semiconductor
Linker problem - cannot find entry symbol
I am using FX3 and SDK 1.3 and trying to create a new project and run a simple blinky program. Having followed the programmers manual section with a lot of headaches I can finally start to compile the project but I am now stuck at the linking stage. I thought the Firmware entry point would be handled by the startup.S code and the linker script file all taken from the other basic examples - all the imported projects compile without a problem but ..
I get the following warning followed by the exit. I assume the exit is caused by the warning - can anybody point me in the right direction to debug this.
c:/program files (x86)/cypress/ez-usb fx3 sdk/1.3/bin/../lib/gcc/arm-none-eabi/4.5.2/../../../../arm-none-eabi/bin/ld.exe: warning: cannot find entry symbol CyU3PFirwmareEntry; defaulting to 40003000