CY7C65630 | Cypress Semiconductor


Summary: 1 Reply, Latest post by PRJI on 09 Jan 2013 04:08 AM PST
Verified Answers: 0
Last post
Log in to post new comments.
KRV's picture
1 post

Hello All,

If I load the default configuration file provided by Cypress (when I installed the drivers) from the directory C:\Cypress\USB\CY4605-HX2LP\1.0\Software\Config_file\2_port.iic for CY7C65620 into the CY7C65630 part, will it function correctly?

Since CY7C65620 is 2-port hub and when the same config file is loaded into a 4-port hub part, will only 2 ports be enabled?

If a config file has already been loaded into a device using Primer.exe, how can I load different config file into the same device. When I use Blaster.exe to do a Read From EEPROM, I get a message " Cannot Open Device" and I cannot erase the EEPROM also using the blaster application.

Thank you for the support.


prji's picture
Cypress Employee
473 posts
 Yes, Only two ports will be enabled.
  The device needs to be bound to "Cypress USB Hub Manufacturing driver", available in C:\ProgramFiles\Cypress\CY4606-HX2LP RDK\Software\Driver,for accessing through Blaster.
Log in to post new comments.