Bulk_IN and Interrupt_IN Endpoint Problems | Cypress Semiconductor
Bulk_IN and Interrupt_IN Endpoint Problems
I'm developing a chain for data transfer from a testing system with a FPGA over GPIF II and FX3 to a PC-Host.
My first tests with the demo applications for fx3 and the host ( Control Center,...) were successful.
At the moment I have a Problem with the endpoint on the host, Interrupt_In and Bulk_In. I have on the host a c#-application with 2 threads for transmit and receive data. sending data to the testing System works perfect. But I'm having following Problems while receiving:
Interrupt endpoint: how can I detect an Interrupt? there is no example in the CyUsb .Net Reference...any flag or Routine, there is no document which describe the Interrupt endpoint exactly
Bulk_In_Endpoint: timeout problems or data length...i'm not sure and not able to programm a interface to read continuously from a bulk_in_endpoint. The System sends data after starting by sending the command over the transmit_thread....Thank you in advance!