A problem when using gpif.c | Cypress Semiconductor
A problem when using gpif.c
I want to use GPIF for get the data from a adc. But I found a promblem after I add the GPIF.c, which is exported by GPIF designer, to the keil project. I built the project. and download the HEX file to the 68013. But after than, the 68013 look like halted, there are no response. the USB Console said that there are not device connected. The problem disappear after I remove the GPIF.C file in the project.
I think the problem is casued by the linker, so I check the project options in the example project. finally, I fixed this problem by modified the code range and xdata range in the bl51 tab, which is located in the option for the project. here is the snapshot of the setting