Problem with ezloader driver | Cypress Semiconductor
Problem with ezloader driver
Hello! I have a problem with ezloader driver when trying to upload firmware code of a definite size to the device (EZ-USB FX2 / FX2LP).
I have created project with my firmware code and compiled it in Keil uVision. The output is .HEX file. It heve uploaded it with Control Panel successfully. The device worked.
Using "EZLoader Custom USB Firmware Loader Drive" note I have created my own driver that was uploading my firmware automatically to the device. The device worked successfully.
All was ok until the size of the project became >11K (about). The .HEX file is still may be uploaded with Control Panel and device works. But when I make my ezloader driver with firmware code >11K, the driver works uncorrectly. When I attach the device it goes the endless cycle of uploading firmware without any errors.
The problem is size of firmware code when uploading it with driver.
I have seen such a problem but haven't seen the solution.