Other examples? | Cypress Semiconductor
We have used the 68013A 56pins in a design and are having problems to get it to work. I am now working on the CY6384 to try to understand how to use this circuit. Unfortunately the examples included in the documentation does not give much help. I find it hard to believe that looping data from one endpoint back to another endpoint inside the chip is a typical application for anyone.
Does anybody know of some examples that read og write data from endpoint to ports?
Our application is quite simple. We have two 16 bits ADCs multiplexed to port B and D. When output are ready from the ADC we read the port and put the data in the endpoint fifo. The plan was to used Endpoint 2 and 6, the configuration 9 in figure 1.17 in TRM. From the Users Guide this should be an easy task, the only thing we would need to do is to write the TD_Init and TD_Poll to initialize the ports and registers. In the TD_Poll we check the Output Ready from the ADC connected to RDY0, and read the port. Any examples doing something like this?