You are here

cy7C68013 C0.C2 mode | Cypress Semiconductor

cy7C68013 C0.C2 mode

Summary: 1 Reply, Latest post by RSKV on 02 Feb 2014 02:30 AM PST
Verified Answers: 0
Last post
Log in to post new comments.
Bram's picture
2 posts

 i have write a  firmware, and use the kneil 4 to compile it, when output, i use the command as below:

Hex2bix.exe -i  -o bulktogpif.iic bulktogpif.hex -f 0xC2 -v 0x0451 -p 0x32AF

the i use the control center download it to EEPROM, and the software show it programmed successfully, and i also load 
the sprit file and display the sprit,
But, it seems that the usb is started as the C0 mode, 
can you help me, how can i know whether EEPROM is programming successfully and the 68013 is working by load the firmware which is written by myself?
rskv's picture
Cypress Employee
1134 posts



Please follow on



Sai Krishna.

Log in to post new comments.