The address of EEROM | Cypress Semiconductor
The address of EEROM
I am developing the board which uses CY68013A.
ERROM for boot use 8kbyte, the device-address is A[2:0]=001.
Can other EEROM-device be added to A[2:0]=000 by the purposes other than the boot?
It is described on "13.5 EEROM Boot Loader" of the technical reference manual as "Additional EEPROM devices (with slave address of 1010) can be attached to the I²C-compatible bus for general-purpose use, as long as they are strapped for device addresses other than 000 or 001.".
It is possible because "000 or 001". (not "000 and 001")