Simply boot from the firmware on EEPROM | Cypress Semiconductor
Simply boot from the firmware on EEPROM
Maybe this is a very primitive question but I need help.I want to boot up DVK board from EEPROM(24FC256) via I2c.
What I did was below:
1.Edit vid/pid of slavefifosync sample
2.Add '-i2cconf 0a' option to elf2img.exe
3.Built project,burned .img file to EEPROM(offset 0) via ROM writer
4.Set switches to:
SW25=off/off/off/off (I guess pmode will be F1F)
SW40=on/on/on/off (I guess the ROM address will be 0)
Anyway,it didn't work.When I loaded the firmware on the RAM via USB control center it worked correctly.What was wrong?Or is there anything I have to do more?
I wish someone will reply to me...