The parameters of the custom function lead to debugging failed with using J-LINK V8 | Cypress Semiconductor
The parameters of the custom function lead to debugging failed with using J-LINK V8
Hello, I encountered a problem when using JLINK V8 debugging
I created a custom function test_function(uint8_t test_uchar),then called in the main function, if the parameter is greater than 128,like 0xc8, when the single step execution where J-LINK die.
Then I used the disassembly took a look, found that every time is killed off in the STRB instruction.
The details are as follows:
add r11 sp,#0;
mov r3 r0;
strb r3,[r11,#5]; The debugger execution here is no response
My friends also encountered similar problems, please help us.