You are here

INT#/CTL[15] handling? | Cypress Semiconductor

INT#/CTL[15] handling?

Summary: 1 Reply, Latest post by Nishant on 09 Nov 2016 01:11 AM PST
Verified Answers: 0
Last post
Log in to post new comments.
mstx's picture
User
32 posts

Hello

Due to a PCB issue, I need INT#/CTL[15] either fixed to 0.0 V or high impedance. Currently, I did not do anything with it and it drives an intermeidate level of 1.5 V.

From the technical reference manual (Spec No.: 001-76074 Rev. *B), I learn "The INT# pin can be configured to indicate the presence of FX3 in low-power mode" so I assume that it can actually be configured. But how?

Regards
Peter

nisa's picture
Cypress Employee
86 posts

Hey Peter

The INT# pin can be configured to proper level using the GPIF project. While designing the GPIF project, you can add one more output signal and assign it to the INT# pin. You set the state of that pin the GPIF state machine. Please try!

Log in to post new comments.