the device cannot start(code 10) in win7 64 bit | Cypress Semiconductor
the device cannot start(code 10) in win7 64 bit
1. connect USB3 device to PC, use the driver in FX3SDK (version 1.3) win7 x64; it is correctly recognized;
2. download firmware using cyconsole, first the firmware is "bulk_loop" in the stream example, it is correctly recognized;
3. do 1,2 again, but this time try another firmware, "streamin" in the stream example, error happened, it shows" the device cannot start(code 10)" in the device manager;
try other firmware, the error is still there;
I reinstalled the win7 OS , but the problem is still there.
any suggestions on this problem? Thanks