connection between FX3 and USB connector | Cypress Semiconductor
connection between FX3 and USB connector
In the AN70707(Page 6) and the pcb file of FX3_DVK(FX3_DVK DEVICE_Brd_Rev2_PD11-0306_PCB_051611-1.brd), the pin of FX3 connect to usb3 connector in this order:
SSRxM A3---pin 10 SSRx+
SSRxP A4---pin 9 SSRx-
SSTxP A5---pin 7 SSTx+
SSTxM A6---pin 6 SSTx-
But the pin10 of usb3 connector is the SSRX+(USB 3.0 Specification, Page 103), A3 is SSRXM (CYUSB3014 datasheet Page31, 33).
pin9 is SSRX-, A4 is SSRXP.
Is it right to connect in this order?