Cannot install the driver for CyUSB3014 on a custom board | Cypress Semiconductor
Cannot install the driver for CyUSB3014 on a custom board
I am using our custom board and I follow the steps in CyAPI.pdf regarding the "Matching Devices to the Driver".
1. In Step A.1. the default path is "C:\Program Files\Cypress\FX3 Host Software\Driver\bin"
Eventhough I installed the Cypress in the default path, there is no folder with name: "FX3 Host Software".
Instead I can find the driver in the path: "C:\Program Files\Cypress\EZ-USB FX3 SDK\1.0\driver\bin"
2. There was no [Device] section in the CYUSB3.INF, so I added one.
3. In Step A.4. it is asked for VendorID and ProductID. Where can I find this information about the IC on the board? I used the default values suggested in the pdf but I receive the message:
The specified location does not contain information about your hardware
4. There are already some other VID and PID in the CYUSB3.INF, should they be kept or have to be removed?