You are here

PSoC Creator will not detect PSoC 5LP | Cypress Semiconductor

PSoC Creator will not detect PSoC 5LP

Summary: 13 Replies, Latest post by cbelter_1781346 on 15 Sep 2016 05:33 AM PDT
Verified Answers: 3
Last post
Log in to post new comments.
colin.terry_1842216's picture
User
7 posts

Hi,

 

The problem I am running into is that after I programmed my CY8CKIT-059 PSoC 5LP for the "Hello World!"/"LED Blinky" program the PSoC Creator 3.3 Software will not, nor will the PSoC Programmer 3.24 detect the device any longer. Any help will be beneficial. Thanks

user_242978793's picture
User
1456 posts

Does the kitprog show up in device manager with a com port number?

colin.terry_1842216's picture
User
7 posts

Yes it does. That is the part that is confusing me the most.

user_1377889's picture
User
10699 posts

Please report the kit's LED status. Try pressing the reset switch for > 6 seconds.

 

Bob

colin.terry_1842216's picture
User
7 posts

After doing that the status LED will either be solid or breathing. It changes every time I hold the reset for >6 seconds.

user_1377889's picture
User
10699 posts

...and? Did you read the Kitprog documentation? You can only program your device when the LED shows solid light.

 

Bob

colin.terry_1842216's picture
User
7 posts

...it doesn't even show up when the light is solid.

user_1377889's picture
User
10699 posts

Hmmm.... Unplug the kit. De-install the USB driver using USBDeview64 from nirsoft.net (free). Reboot. Plug in the kit and wait for drivers installed completely.

 

Bob

 

colin.terry_1842216's picture
User
7 posts

Awesome, thank you.

user_1377889's picture
User
10699 posts

When this fails, I would suggest you to get in contact with Cypress directly: At top of this page select "Design support -> Create a Support Case" and ask your question. You will be helped by a Cypress engineer.

Bob

colin.terry_1842216's picture
User
7 posts

Yeah,

 

That didn't work, I'm waiting on a response from Cypress. Thanks.

Log in to post new comments.