USB - UART pioneer kit problem | Cypress Semiconductor
USB - UART pioneer kit problem
For a school project I designed a method to look how long a dma transfer of x bytes takes vs doing it in software.
The problem is that I can't get the usb uart working properly. I have used the same value's as in the Cypress Psoc5LP USB uart example but my pc says It can not recogneise it.
Neither does it recognise the PID and VID (just say's 0).
I am using the Psoc 4 pioneer kit and bootloading the psoc 5.
Also I tried to remove al the extra code and components and just get the usb uart to work. But it was no success.
The files are attached.
I hope i can find some help here.