please help me.?????
I use no OS,no TS
I build error
"The command 'arm-none-eabi-gcc.exe' failed with exit code '1'."
probably nobody answered your question because nobody understood your problem. We all can see that you've made a C-coding error, but from that small piece of information every hint would be a guess.
As far as I remember I asked you before to post your project here if that is possible.
By the way: usually the very first error or warning (together with the source-file-line) states the reason for not compiling. The message you privided is the final one stating "I cannot compile your program"
PS: when it is too difficult for you to express what you want to say in English, I would suggest that you ask a friend or collegue to help you, as I can see English is not your native language and to help you needs more insight.
Thank you,I will try to communicate in English.
I Attach file code ,To help me.
The uploaded Zip file has an error. Will you please
"File->Create Workspace Bundle(minimal)"
and uplaod the .Zip-file again
Attact file again.
data of GLCD controller RA8835
Yes, as I thought. You did not include the file "GUI.h" to the project header files. To do that, right-click in the workspace-explorer (at the left) on "Header Files" then "Add", search for your "GUI.h" and open it.
When you compile your program (as it is now) you'll find on bottom on the right-hand side an area showing "Errors Warnings Notes". Clicking on that area shows more information about what has happened and there you will see the hint, that "GIU.h" could not be found. When you double-click on that error-message the corresponding file will be opened and the cursor placed just on the offending line. Nice feature, isn't it?
Were unsuccessful ,not complete.
Yes, the compiler states quite clearly, that it cannot find the function GUI_Init() you called. Same with GUI_DispString
Where is it? Did you add the file to the source-modules?
You have a problem with some extenal programs (emWin) which you did not set up completely for the compiler. Probably you miss the GUI.c -File.
Seemingly too few people are using emWin to help you any further, this is not a PSoC or C-Compiler problem.
it new support psoc,I will do next..
No, no headaches, did you add the GUI.c file?
Without GUI.c in the emWin pack,I can not find it.
Well, and the compiler doesn't find it ether. Look at your emWin installation and documentation where to get it from or if you have it to make yourself which would mean: create that file and write all the routines given in GUI.h yourself. Go into the documentations would be the best.
I know this thread is a bit stale, but I just had the same problem.
Basically you need to direct the compiler to the library linked file for emWin (since we don't have source code, only the linked libraries)
See the pdf component datasheet for the emWin Graphic Library -- on page 4
"Add the link library file. The emWin GUI can be used with the Keil_PK51, GNU CC, KEIL
MDK, or KEIL RVDS toolchain, so select the library according to the toolchain you choose.
From the menu Project > Build Settings > Linker > General > Additional Link Files,
select the library file.
Note The process of adding the library to the linker is different for the GCC toolchain. In this
case, the directory containing the library is added to the linker with the “Additional Library
Directories” setting and the library is specified with the “Additional Libraries” setting. The
library name used for this setting must have the “lib” prefix and “.a” suffix removed from the
name. In other words, give it the directory and in this case type in emWinnosnts under Additional Libraries