You are here

CY8C5588AXI-060 availability | Cypress Semiconductor

CY8C5588AXI-060 availability

Summary: 4 Replies, Latest post by PDES on 22 Mar 2012 04:05 AM PDT
Verified Answers: 0
Last post
Log in to post new comments.
PDES's picture
10 posts


I'm developed a board based on CY8C5588AXI-060, the same used in the PSoC5 evaluation board, but I can't find it.

the cypress website lists the PSoC5 devices but seems that this device is no longer present.

Is the CY8C5588AXI-060 not yet available?

Is the CY8C5568AXI-060 pin-to-pin compatible with the CY8C5588AXI-060 ?


Best regards

dasg's picture
Cypress Employee
730 posts



CY8C5568AXI-060 is pin-to-pin compatible with CY8C5588AXI-060. You can go ahead by using this device (CY8C5568AXI-060).

user_78878863's picture
2553 posts

But remember that the CY8C5568 is not completely functional equivalent with the CY8C5588-ES2. For example, with the move to production silicon (and to Creator 2.0), the CAN component has been removed, and the ADC sample rate has been lowered. So look into the Creator 2.0 release notes for all changes which might affect you.

user_1377889's picture
9301 posts

There is a CAN-module back in Designer 2.0, but I cannot tell if it is what you expect.


PDES's picture
10 posts

Hi all,

thanks for suggestions.

I don't use CAN or ADC peripherals but I'm mainly interested in the UDB resources and the pin-to-pin compatibility.

Are these parameters guaranteed?

Can I consider the speed grade the only main difference in terms of hardware resources between CY8C5588AXI-060 and CY8C5568AXI-060?


Thanks in advance


Log in to post new comments.