Read 5 bytes or more with the UART Rx using inrrepts | Cypress Semiconductor
Read 5 bytes or more with the UART Rx using inrrepts
Hello, I´m trying recive 5 bytes with the UART and print it in a LCD in byte formate , my module UART have the next configuration:BautRate=9600 ; Data bits:8; Parity type:None; Stop bits:1; Flow control: None; Break signal bits: 13;Enable 2 out of 3 voting per bit; and disabled CRC outputs. RX Buffer sizes: 5 bytes, Oversampling rate: 8X
The basic probem is, when i try to recibe data, only can see the first 4 bytes and after i send others 5 bytes, sometimes don´t read or only recibe the first byte.Really I don't if i am using in correct form the RxBuffer. I read the datasheet of the uart but it don't resolve my doubts about how work with more than 4 bytes and how to pass or manipulate this data in the bufferRx.
Attached is a copy of the file that I'm creating, I take to make an apology for the format of my previous post.