PSoC® 3 / PSoC 5 Programming Using an External Microcontroller (HSSP) | Cypress Semiconductor
PSoC® 3 / PSoC 5 Programming Using an External Microcontroller (HSSP)
The application note AN73054 shows how to apply C code to program PSoC® 3 / PSoC 5 devices using an external microcontroller. This process is referred to as Host Sourced Serial Programming (HSSP), in which the host microcontroller programs PSoC 3 / PSoC 5 through the serial wire debug (SWD) interface.
PSoC 3 / PSoC 5 device programming refers to programming of the nonvolatile memory in PSoC 3 / PSoC 5 using an external host programmer. The host can be the MiniProg3 Programmer supplied by Cypress; a third-party programmer; or a custom-made programmer, such as an on-board microcontroller.
The application note is available at http://www.cypress.com/?rID=57435