Problem with HID Bootloader | Cypress Semiconductor
Problem with HID Bootloader
I have created a USB HID bootloader project and a bootloadable project for a PSoC5.
My test bootloadable project is just a PWM which toggles a LED. So far the bootloader works because once I load the bootloadable with the USB bootloader GUI software, I loose the USB device in the PC and the board starts toggling the LED as I configured it in the bootloadable.
The problem is that when I convert my application program to a bootloadable project and then program it to the PSoC using the bootloader software, it seems to do it but the progress bar never gets to the end. I hear the usb sound as disconnecting but then is connected again so my software never starts but instead stays in the bootloader.
I don't get any error. I configured the bootloadable with the same dependencies that I used for my first LED test bootloadable application so I don't know what the problem might be. I'm only using 26.2% of Flash and 32.8% of RAM in my application so I don't believe that could be the cause.
What could be causing this?