Interrupt Generation from Comparator Issue | Cypress Semiconductor
Interrupt Generation from Comparator Issue
I'm trying to generate an interrupt signal from the rising edge of comparator output signal.
I've connected 60MHz clock(master clock of my PSoC5LP Chip) to the comparator's clock input and isr component to the output of comparator.
However, the isr component does not generate any interrupt signal although I properly set the type as "rising edge".
Since the input of comparator is 60Hz rectified sine wave, I think this problem has nothing to do with the input signal's frequency.
I cannot find the reason why isr component cannot detect the rising edge of comparator output.