Any advice,examples or solutions can be helpful. :)
There are a number of different algorithms with different properties,
This ap note is PSOC 1, should be able to easily port to PSOC 3/4/5.
Note PSOC 4 has a full 32 x 32 multiplier single cycle MAC in it, an
important advantage in demanding applications.
If you are doing tone detection, Goertzel algorithm maybe one of the
Hi, I just read http://www.cypress.com/?app=forum&id=4749&rID=82225
But I cannot open that PSoC4 project :(
BTW, have you completed the FFT design on PSoC5?
What version of Creator did you use?
I'm using of course 2.2 SP1, that has no problem, build was succeed.
You can change PSoC4 to PSoC5 by using Project/Device Selector...
FFT does not using hardware register, just only a user program.
Easy to porting into PSoC5, as you know.
ARM provides the DSP library for all the microcontrollers with ARM core. The DSP library is developed by some vendor for ARM.
This library can be used with PSoC 5LP. I haven't tried it but I have just heard of it. By the way anyone in the forum have used it?
I have just built it with the version of Creator 2.1
but it was not successful.
There are some errors:
".\Generated_Source\PSoC4\CyFlash.c:64: error: 'CYREG_CPUSS_SYSARG' undeclared (first use in this function)
.\Generated_Source\PSoC4\CyFlash.c:78: error: 'CYREG_CPUSS_SYSREQ' undeclared (first use in this function)
.\Generated_Source\PSoC4\CyFlash.c:123: error: 'CYREG_CLK_IMO_CONFIG' undeclared (first use in this function)
.\Generated_Source\PSoC4\CyFlash.c:178: error: 'CYREG_CLK_SELECT' undeclared (first use in this function)
The command 'arm-none-eabi-gcc.exe' failed with exit code '1'. "
By the way, how to transfer the data from ADC as the input samples to FFT?
There is a zip file about implementing AN42877. But I cannot find something like the workspace file for creator in it.
I'm sorry that I have never used PSoC1 before.
How could I modify this PSoC1 example to apply to PSoC5?
Sorry, Chrome didn't work, I have to upload it with IE.
Here is the attachment.
Thanks for your help :)
You have to upgrade Creator to the 2.2 SP1.
That is a most fast way to do.
The project just only contain 64points FFT calculation routine, Not include ADC.
Sampling rate will depending upon your ADC design.
64 is a simply design value, could be increase it, it's not difficult.
AN42877, seems to be no project file for PSOC Designer. You might try
contacting one of the authors, Nicola, I found his email in a paper he
If you can get source consider posting it for rest of forum users.
As for FFT, basically it is an operation/transform on a sample set. So using
the A/D you collect an array of samples, and pass that to FFT. Usually one
would use a continuous A/D, storing samples, in a circular array and keep
calling FFT each time a new sample added, old sample destroyed. However,
if time to compute FFT >> time to sample (usually the case), then use a ping
pong array setup, first fill up one array, then pass it to FFT while filling up a
second array, and repeat.