Have somebody experiance with the LIN-Bus slave? | Cypress Semiconductor
Have somebody experiance with the LIN-Bus slave?
I just have start with the LIN-Bus. But I have got problems with my first project.
Send a frame from my LIN-Master to my LIN-Slave (the PSoC). Print out a specific part (signal) of the frame on a display.
...I send a frame from my Master to the slave (00 11 22 33 44 55 66 77 88). In the attach you could see a scope picture of the input from the LIN-Slave at transmitting the frame. So my circuit with the LIN-Transmitter (MCP 2004) work.
LIN_Slave_Example -> From here I extract the code for my project
secondslave_creator22 -> My Project
master.jpg -> Picture of the Software Master APG LIN Serial Analyzer from Microchip
scopepic -> Picture of the input the LIN Slave by receiving a frame from the Master
Note: I know that the ID in the Master pic is 80 but I think this should be because of LIN specific rules. I think this is not the problem.
LIN-Master: LIN Serial Analyzer from Microchip
Tranceiver: MCP 2004 LIN Tranceiver
Thank you everybody for your help!