Can't Program PSoC 5 | Cypress Semiconductor
Can't Program PSoC 5
I'm unable to program my board. The project compiles properly, but when I try to program the device, I get a window asking about the target device. I'm using the miniprog3 to program the device, and I've tried configuring it through the target window. I've set it to SWD and made my own connector to wire the miniprog to the proper ports on my board.
However, I can still program my PSoC 3 just fine. The same project will compile and program the PSoC 3.
I've tried 5 pin and 10 pin connections and I've tried changing any and all of the settings I can find for the miniprog in my target window. I just don't what's wrong, or how to fix it.
Any help would be greatly appreciated.