Bypass digital BiSS signal trough PSoC5LP | Cypress Semiconductor
Bypass digital BiSS signal trough PSoC5LP
I currently trying to bypass a digtial signal trough the PSoC5. I attached an image to clearify the configuration.
The pins 2 and 4 transfer the clock signal of an external BiSS interface which is set to 2 MHz and Pin 3 and 6 shall transfer data. Pin 2 and 3 are connected to an external Biss-Interace and pin 4 and 6 are connected to a sensor.
But it does not work. I can not set up a connection. My question is: What may causes the problem? Could the internals of the PSoC destroy the signal or slow down the clock signal?
I checked if bypassing is possible with analog pins and it worked.