2.8" TFT color module won't work with 8-bit parallel interface and SEGGER emWin files | Cypress Semiconductor
2.8" TFT color module won't work with 8-bit parallel interface and SEGGER emWin files
PSoC5 connected to D8-D15 of a 2.8" TFT color module using it as 8-bit parallel interface. Controller is ili9320. Control lines connected accordingly. The TFT module is coming from the STM-32 Mini development board.
Cymodule: Graphic LCD 8-bit Parallel Interface Macro, customized for 8-bits and 3 ClockCycles Low/High pulse width.
Added the SEGGER emWin files to my project according the Cypress installation procedure.
I have added de register initialization settings to the LCDConf.c file at the InitController function.
No errors after building the project but also nothing on the screeen. I only see the RESET function (Light OFF and ON).
Has anyone experience with this type of TFT display or even better has this thing working.....?
I hope to get some suggestions to look after to get my TFT working because I tried everything what comes up in my mind (!).