Help with Radiated emmisions | Cypress Semiconductor
Help with Radiated emmisions
I am using a 5LP device in a product that is being tested for FCC and CE certification. The response is slightly out of limits at 80MHz and I suspect this is the controller. I need to reduce Radiated emission by 2uV at 80MHz.
The controller is being run at 3.3V.
Are there some relatively easy to implement techniques to lower the RE? (ie. A clock parameter change or something I would turn off)?
The hardware has short traces, plenty of decoupling close by the controller and laid out with large ground plane with lots of vias stitching top and bottom layers. (it is a 2 layer PCB, 1.6m thick with 1oz copper).
My project uses a 1ms timer, SPI, RS485 and a generated 125 kHz Square wave signal from PWM.