Help for programing a CYBLE ship in a self made PCB | Cypress Semiconductor
Help for programing a CYBLE ship in a self made PCB
I work with a self made PCB. My CYBLE ship is a CYBLE-022001-00. On my PCB, i have a male header of 3 pins for programming (SWDIO, SWCLK and GND ). I know normally we need 5 pins, but the board is self powered and we do not use the XRES pin.
I would like to program it but i don't know how to do it. In fact, i do not have programmer like MiniProg3. I have been told that with my CYBLE-022001-00, i do not need programmer because it is already integrated. But i am a bit septic. In Psoc creator, we have to choose a programmer among the list ( KitProg, KitProg2,MiniProg3...) but assuming CYBLE-022001-00 has its own, no one in the list is suitable.
I thought of using PSOC Programmer, but first i have to link the CYBLE-022001-00 to my computer. I have been told that it was possible using a USB cable. I should denude the extremity and plug the right wires to my header. It looks like a bit extreme, but assuming it works, then, i should use the bootloable and bootloader components in two differents projects, right ? I am quite lost as you can see. I forgot to say that i have the CY8CKIT-042-BLE kit. I hope someone will be able to guide me !