You are here

First Program for PSoC, LED Blinking | Cypress Semiconductor

First Program for PSoC, LED Blinking

Summary: 3 Replies, Latest post by Bob Marlowe on 15 Nov 2016 04:01 AM PST
Verified Answers: 0
Last post
Log in to post new comments.
Gautam Mandewalker's picture
User
2 posts

HI,

I switched form Arduino to PSoC today and followed PSoC101 tutorilas and executed the first LED Blink program.

I am using: CY8CKIT-042-BLE Bluetooth® Low Energy (BLE) Pioneer Kit

 

I am not understanding why the following piece of code only making RED LED blink. Why Green and Blue is not working.

 

#include "project.h"

int main(void)
{
    CyGlobalIntEnable; /* Enable global interrupts. */

    /* Place your initialization/startup code here (e.g. MyInst_Start()) */

    for(;;)
    {
        /* Place your application code here. */
        Pin_Red_Write ( ~ Pin_Red_Read() );
        CyDelay( 500 );
        Pin_Blue_Write ( ~ Pin_Blue_Read() )  ;
        CyDelay( 500 );
        Pin_Green_Write ( ~ Pin_Green_Read() )  ;
        CyDelay( 500 );

    }
}

user_1377889's picture
User
9572 posts

Welcome in the forum.

Probably the pin assignment of your LEDs is not right. Can you please post your complete project, so that we all can have a look at all of your settings. To do so, use
Creator->File->Create Workspace Bundle (minimal)
and attach the resulting file.

 

Bob

 

Gautam Mandewalker's picture
User
2 posts

Hi Bob,

Thanks for responding.

 

Please check the atatchments.

 

Thanks.

 

user_1377889's picture
User
9572 posts

On my Pioneer kit (without BLE) all three colours are shown. Something else must cause that error.

 

Bob

Log in to post new comments.