Day025_BLE_Over_The_Air_Update Project | Cypress Semiconductor
I am trying to run the Day025_BLE_Over_The_Air_Update project and have run into a minor problem which I hope someone will be able to help with.
All the code compiles, downloads and runs correctly to the target via the USB.
When I open the Bootloader Host Tool as detailed in the Over_The_Air.pdf, I cannot see the Cypress BLE Dongle.
I can only see the KitProg USB-UART associated with the BLE Dongle.
I can see the Cypress BLE Dongle using the CySmart 1.2 application which shows the dongle as a CySmart BLE 4.1 USB Dongle running firmware 220.127.116.11.
Using this I can see my BLE devices and interact with them.
Do I need to flash the dongle with other firmware or do I need to do something else to allow the Bootloader Host Tool see the dongle?
NOTE: I never have the CySmart 1.2 application active when the Bootloader Host Tool is active.