You are here

BLE OTA EXTERNAL Memory Bootloader and Bootable example project | Cypress Semiconductor

BLE OTA EXTERNAL Memory Bootloader and Bootable example project

Summary: 3 Replies, Latest post by bobgoar on 10 Sep 2016 08:16 AM PDT
Verified Answers: 2
Last post
Log in to post new comments.
rowland.roderick_1778786's picture
User
10 posts

I've built both bits of software for the CY8CKIT-042-BLE.

However, when I try to program the Bootlaoadble image into the 'kit', in the Select Debug Target, the kit deosn't show up ?

Do I need to change a project setting  etc ?

 

 

 

 

mady's picture
Cypress Employee
1058 posts

Hi,

Please check if the drivers for the kits are installed. (You can confirm this in the device manager)

Also, please check if the jumpers on the Kits are in place. 

Make sure the part number of the project matches with the part number of the module you have placed on the kit.

Regards,

- Madhu Sudhan

user_242978793's picture
User
1207 posts

Boot loader host doesn't work for this application you need to use CYSMART 1.2 to program the Ble dongle!!

user_242978793's picture
User
1207 posts

-> Build bootloader project -

> set the bootloadable project active -

> enter the path of bootloader project files in the bootloadble component of bootloadable project -

> build and program bootloadable project -

> Open cysmart 1.2 (make sure the security settings are same as your bootloadable project. Open 'configure master settings ' of cysmart window -

> see security parameters-

> see it is unauthenticated with encryption (as in your bootloadable project) ) -

> Now press sw2 on the pioneer kit to enter into bootloader mode. Now red LED will be blinking on the kit. -

> Now start scan in Cysmart -

> Device info example -

> click on it and press upgrade firmware button -

> select the .cyacd file and see whether OTA is failing. At my end it was successful.
 

Log in to post new comments.