WDT interrupt is not interruptible (?) | Cypress Semiconductor
WDT interrupt is not interruptible (?)
I have been developing an application based on PSoC4 BLE (CY8C4248) in which the WDT1 interrupt is used to wake up the processor every 976us (let's say 1ms).
I have used the CySysWdtSetInterruptCallback function to register my ISR.
All is good so far.
I would like to service a higher priority interrupt while the processor executes code inside the WDT1 ISR but the registered ISR is not interruptible even if I define the priority of my higher priority interrupt at level 0. Also, the WDT interrupt is not visible in the interrupts tab of the design wide resources in the PSoC Creator.
Can I change the interrupt priority of the WDT ISR?
Thank you in advance,