uart bootloader - 'Packet length invalid | Cypress Semiconductor
uart bootloader - 'Packet length invalid
Hi, I am new to psoc4 and for the most part I have been very impressed with the flow! I am finally trying to implement my application with a bootloader for the final product and am having problems with the uart bootloader.
I have stepped back and tried to get things running on the pioneer board with the bootloader examples. I was able to get the i2c bootloader example working. I modified the project to support the uart bootloader and it is not working. I get the following error: "The bootloader reported error 'Packet length invalid: the packet's length does not conform to the required packet format"
I ahve double and tripled checked my setting and dropped the baudrate just be sure it was not a timing issue, but keep getting the same error. Based upon error, it sounds like the packet size generated in the bootloadable project may be the issue? I don't see any settings for this.
Any ideas? As always, I'm time crunched to get this working. I have attached my bootloader and bootloadable projects.