You are here

Substitue CY8CKIT-042 Kit with CY8CKIT-044 Kit (for CY8CKIT-037 Motor Control Kit) | Cypress Semiconductor

Substitue CY8CKIT-042 Kit with CY8CKIT-044 Kit (for CY8CKIT-037 Motor Control Kit)

Summary: 3 Replies, Latest post by Bob Marlowe on 18 Jul 2017 10:40 AM PDT
Verified Answers: 1
Last post
Log in to post new comments.
w.wassertal_2388221's picture
User
2 posts

I have got the CY8CKIT-037 PSoC 4 Motor Control Evaluation Kit (http://www.cypress.com/documentation/development-kitsboards/cy8ckit-037-...) and the CY8CKIT-044 PSoC® 4 M-Series Pioneer Kit(http://www.cypress.com/documentation/development-kitsboards/cy8ckit-044-...).

I read that you are advised to use the CY8CKIT-042, but can I also use the 044 and how would I do this?

user_1377889's picture
User
10705 posts

Welcome in the forum.

Change the device of the project to your CY8C4247AZI-M485 using Creator -> Project -> Device Selector.

 

Bob

w.wassertal_2388221's picture
User
2 posts

Thanks a lot Bob!

However after I programmed the device (and checked all jumpers) with the Sensored BLDC Motor Control example it does not work.

The blue led turns on when I press SW2, but the motor is not rotating..

user_1377889's picture
User
10705 posts

The arduino interface uses different pins for the -42 and the -44 kit. Open the schematic for both boards and see what you need to change in the pin assignment.

 

Bob

Log in to post new comments.