SCB UART, Using SCB0:SPI:SS0 as a digital input. | Cypress Semiconductor
SCB UART, Using SCB0:SPI:SS0 as a digital input.
I have a project where I need to use the SCB UART to communicate to a PSoC 5 but also I need to use two extra pins that are connected to the SCB0:SPI:SS0 and SCB0:SPI:SCLK.
In my board those pins are used because I wasn't sure if I was going to use SPI or UART + 2 extra pins to communicate both devices.
Now, if I use the UART SCB in SCB0 , I can't connect digital pins to the SS0 and SCLK pins. I thought that since the UART only uses two pins I could use the reset of the SCB pins as digital pins.
Could I just read the registers? I need both pinst to be inputs.
I've attached the archived the project.