Question about SPI Master IRQ behaviour | Cypress Semiconductor
Question about SPI Master IRQ behaviour
I work with the SPi Master Version 2.40.
First I enable the internal IRQs for RX Fifo not empty and Tx Byte complete with the configuration tool (schematic view) and everything works fine, the IRQs are fired as I exspect it.
Then I use the API function SPIM_DisableRxInt() and start the test again, but the Rx IRQ still fires.
Then I use the API function SPIM_SetRxInterruptMode(0u) with the parameter 0 to disable the RX IRQs and as exspected the RX IRQ is disabled.
So my question is why the API function SPIM_DisableRxInt() does not disable the RX IRQs ?
Thank for your help.