PWM signal Switching between line to line_n at run time | Cypress Semiconductor
PWM signal Switching between line to line_n at run time
i am using CYBLE-022001-00 / BLE module and generating 1Hz to 40 Hz PWM signal . some time i need inverted signal of waveform signal (example 1Hz signal ). for that i need two different pin for taking inverting and non-inverting signal out .
Instead of two GPIO pin i want to use only single GPIO pin for generating both signal and that switching event must be control through my main() program .
void TCPWM_SetPWMInvert(uint32 mask)
T0 second - PWM output through PIN 1 is Non_Inverting
T0+1 second - PWM output through PIN 1 is Inverting
*Please check the attached jpg also.