PSOC4 ADC of 2048bit linear sensor at 200kHz | Cypress Semiconductor
PSOC4 ADC of 2048bit linear sensor at 200kHz
Wondering if anyone can point me in the right direction for this problem. I need to record the analog voltage level for 2048 pixels on a linear sensor.
My circuit for controlling and reading data from the sensor is working great. I can hardware trigger the ADC from a trigger signal from the sensor, and I can control the clock rate of the sensor between 200kHz and 10MHz, so I should be able to run the ADC fast enough to get data from each pixel.
What's the best(most efficient or fasted) way of storing that data from the sensor/ADC? For some reason it feels like my solution is bogging down responding to the ADC's interrupts. The slowest the hardware trigger for the ADC will run is 200kHz...and I need to get the data for every hardware trigger.
Thanks for any help/advice/whatever.