Programming CY8CKIT-049-42xx PSoC 4 through USB | Cypress Semiconductor
Programming CY8CKIT-049-42xx PSoC 4 through USB
I have CY8CKIT-049-42xx PSoC 4 with miniprog3. First, I programmed the kit through USB bootloader. After that, I programmed it through miniprog3. The problem I am facing right now is that I am not able to program the board through USB again. The error while programming is - "Communication port reported error 'Unable to read data from the target device'." As per the instructions in the manual, the PSoC should enter in bootloader mode (pressing SW1 while connecting it to USB Port), but it isn't doing so. Please provide the solution as soon as possible.
Thanks in advance.