Miniprog3 with PSOC4014 | Cypress Semiconductor
Miniprog3 with PSOC4014
I am trying to program a CY8C4014LQI-421 16 Pin QFN with the Miniprog3 but it does not detect the chip from the select debug target. I have selected the correct part in the device selector and connected VTarget, GND, SWD_CLK and SWD_Data to the target board. Port Setting is Clock Speed 16MHz, 3.3V, 5-Pin and Power Cycle as the miniprog3 will power the target for programming. Error cannot acquire device...
Not sure why it is not detecting this chip so I can program my target board.