You are here

LM35 + PSoC 4 BLE Kit | Cypress Semiconductor

LM35 + PSoC 4 BLE Kit

Summary: 6 Replies, Latest post by vsrs on 07 Nov 2016 01:57 AM PST
Verified Answers: 1
Last post
Log in to post new comments.
srujani.meela7_1971856's picture
User
15 posts

Hi

I want to configure LM35 pin on the CY8CKIT-042-BLE.How to configure and make that work on the board?

Can i have any similar code working with the Analog pins on the BLE kit.

 

Regards

Srujani

user_1377889's picture
User
9583 posts

I cannot find an "LM35 pin" on the PSoC4 Pioneer BLE board. Can you be a bit more specific?

 

Bob

srujani.meela7_1971856's picture
User
15 posts

Hi Bob,

I want to connect LM35 externally on to the cy8ckit-042 BLE. Can I know the steps to configure LM35 externally on to the board and read the analog values using the serial.

Thanks

Srujani

 

hli
user_78878863's picture
User
2575 posts

Read the LM35 data sheet - it shows you the connection that need to be made for the sensor. Then look at the PSoC ADC component data sheet, which explains how it works. There are also example projects available for the ADC.

Basically you run the LM35 with the Vcc of the BLE board, and connect Vout to an analog input pin of the PSoC BLE (which one this is is configured in the project itself).

Hi ,

I would like  to know the connection for ADC for  external interface . I want to connect LM 35.

Please provide the connection CY8ckit-042 BLE.

 

 

 

 

 

user_1377889's picture
User
9583 posts

Welcome in the forum.

Keep to the steps hli supplied in a former post. There are no fixed connections for ADC, you have to specify the pis yourself.

Did you already install Creator 4.0 and your kit files?

 

Bob

vsrs's picture
Cypress Employee
23 posts

Hi Srujani,

Could you please go through this example project. (https://www.hackster.io/22026/temperature-sensor-thermistor-psoc-2241ec) The project is based on CY8CKIT-059. But this should be helpful.

Regards,
​VSRS

Log in to post new comments.