I2C | Cypress Semiconductor

I2C

Summary: 5 Replies, Latest post by Bob Marlowe on 31 Oct 2016 04:05 AM PDT
Verified Answers: 1
Last post
Log in to post new comments.
Srujani Meela's picture
User
9 posts

Hi,

I am trying to configure an I2C on the baseboard (CY8CKIT-042 -BLE) and need to check that on LCD.I am using CY8C4247LQI-BL483 which is an example code from the PSoC 4.

LCD simulation is not working on I2C " Can you provide some steps for this "

The below attached is the code and I have read the datasheet regarding the example program and when  I tried doing it with the SW2 which is on the baseboard,but it also didn't work.If I have to configure the switch SW2 from software only how we have to do that ? Can I know where I am missing.

Srujani

user_1377889's picture
User
9583 posts

What is the LCD module you are using? (Link to datasheet)

 

Bob

Srujani Meela's picture
User
9 posts

hi

I am using character lcd with i2c interface.can you please share the link where i can find some videos for this.

thanks

user_1377889's picture
User
9583 posts

LINK to datasheet is missing

 

Bob

Srujani Meela's picture
User
9 posts

here is the attachment. for lcd using i2c

user_1377889's picture
User
9583 posts

Probably we both are a bit off track due to language barrier.

You are using a PSoC4 BLE

You configured an I2C LCD component (that is software)

You need to connect a real I2C LCD module (that is hardware) to your PSoC

There is no "LCD simulation", so you will need to buy a real I2C LCD module. When you have got one, I would like to have a link to its datasheet.

 

Bob

Log in to post new comments.