Digital Microphone w/ PSoC 4 | Cypress Semiconductor
Digital Microphone w/ PSoC 4
Trying to interface digital mic with PSoC 4 and send decibel level to UART. The datasheet and examples are not geared to the PSoC 4 - i.e. no rx/tx DMA etc.
Video and datasheet www.cypress.com/
Example project but w/ PSoC 5LP www.element14.com/community/thread/28830/l/psoc-4-pioneer-kit-community-project102-usb-audio-using-the-psoc-5lp
I have available both a PDM mic as well as an i2c mic store.invensense.com/datasheets/invensense/INMP441.pdf and can use either. Just assuming the i2s mic will be easier?
One issue seems to be the clock - max audio sampling in the i2c - PSoC 4 seems to be 96kHZ while microphone min. is .5 MHz. Seems like this can't be right or I am missing something?
Any similar projects or guidance on the clock issue (or other thoughts) are much appreciated.