PSoC 3 - Programming Connections/Pins | Cypress Semiconductor
PSoC 3 - Programming Connections/Pins
I am in the process of making a board using the PSoC 3 chip.
I was using the schematics of the CY8CKIT-030 as a reference. In that design, there is a 10 pin header. My questions are as follows:
1) What are the connections needed for the chip to program & debug? In the reference schematic, they have:
p10 - SWDIO
p11 - SWDCK
p13 - SWO
p14 - TDI
These seem to be JTAG. I though miniprog 3 could do SWV/SWD which only required 2 pins? Please clarify.
2) Where can I find the female header to put on the board? I looked at Digikey, and they seem to be out of stock.
3) What should I do with the USB pins if I choose not to use them?