Console Programmer for PSoC3/5LP device. | Cypress Semiconductor
Console Programmer for PSoC3/5LP device.
Attaching the console programmer for PSoC3/5LP device. User guide is available with the application.
This will help in scenarios if you have to create some automation testing setup in which you have to program PSoC device many times without manual intervention. In those cases you just have to run a single command through your script and then you can easily program a hex file in PSoC3/5Lp device.
This command will accept many parameters like path of hex file, protocol (SWD or JTAG), acquire mode (Reset or Power) and other parameters. So it is fully configurable application.
If you have devices connected in JATG chain then you can program nth device in JTAG chain by this application. For that we have parameter "devicenumber" in the application.
For Example command can be:-
CommandLineProgrammer.exe -hex "C:\Users\namn\Desktop\CommandLineProgrammer\Example Hex File\CY8C3866AXI-040\TestPSoC3.hex " -acquiremode "Power" -volt "2.5" -protocol SWD -connector 10P
Unzip the attached file "CommandLineProgrammer.zip" and you will get guide to use the app.