can anyone tell how to view analog analyser window in a creator project?
thnx in advance..
Look here: http://www.cypress.com/?rID=57718
it shows error in renaming .exe file.
logic analyser are used in digital circuit to compare logic high and low values.
anybody tell whats the use and what is analog logic analyser?
is analog logic analyser is equivalent to digital storage oscillioscope(DSO/CRO)?
The analog analyzer is a part of the Creator 2.0 software and shows the routing of the analog resources performed for your chip-desing. Since some of the routes are including resistors you can get the information to alter the way the fitter assigns resources and routes.
Sadly this is not a logic analyzer
Actually, it is called "analog design viewer", and this name makes clear what it is.
@neha: you should not rename the exe file. You need to modify the shortcut calling the creator .exe (maybe you need to copy it beforehand to your shorthand), adding the parameter /adv (IIRC ).
wish thr ws a logic analyser as well...
... and hli built one based on PSoC5 too! Have a look at this thread http://www.cypress.com/?app=forum&id=2232&rID=65870
Analyzers also typically these days are accompanied by stimulus generators.
PSOC DMA = Pattern generator, ability to program digital I/O logic levels, timer/counter implementation of N
burst of N pulses generator, duty cycle, all easily achived by PSOC 3/5. Even the ability to verify PHY
characterisitcs of a digital interface.
A significant part of this can be implemented in Verilog to optimize speed. and simplicity of design.
Here is an open source design using PSOC 5 -